Proton Data Security

Proton® PDS-30 Manual Hard Drive & Media Destroyer

Write a Review

The PDS-30 is designed for the destruction of hard drives of all types, from laptop (2.5 format) and standard 3.5 format hard drives from 0.65" to 1.65" thick, magnetic tapes (DLT, LTO, etc.), cell phones, printed circuit boards and other electronic media by means of a press capable of creating up to 3 tons (6,000 lbs.) of force.

$1,975.00
Frequently bought together:

Description

Manual hard Drive and Media Destroyer. The PDS-30 is designed for the destruction of hard drives of all types, from laptop (2.5 format) and standard 3.5 format hard drives from 0.65" to 1.65" thick, magnetic tapes (DLT, LTO, etc.), cell phones, printed circuit boards and other electronic media by means of a press capable of creating up to 3 tons (6,000 lbs.) of force.

Features & Benefits:

  • Purchase includes: (1) PDS-30 Destroyer, (1) conical tip (installed), (1) short bar with caps, (1) long bar with caps, (1) pair of safety glasses, (1) hex L-key, (1) user manual
  • Safety: The PDS-30 Media Destroyer should NEVER be operated by children or others incapable of understanding its use and basic safety precautions. Because this is an open destruction device it is highly recommended the operator wear eye protection to protect from possible flying debris. A pair of safety glasses is INCLUDED with your PDS-30 purchase.
  • Options:
    • SSD Kit: includes chisel tip & SSD crush plate for the destruction of SSDs & other flash media
    • Tabletop Stand: includes stand structure, hardware & instructions for assembly
    • Floor Stand: includes stand, hardware & manual instructions
  • Warranty: 12 month factory warranty against defects in parts and 90 days labor from shipment date
  • Replacement Parts: Conical Tip (P/N: 220A-100), Chisel Tip (P/N: 220A-101), SSD Crush Plate UHMW Surface Kit (P/N: 220-052), Rubber Arm Caps - 2 each (P/N: 2517T85)
View AllClose

Additional Information

CYCLE TIME:
Approximately 5 seconds
DESTRUCTION METHOD:
Uses up to 3 tons (6,000 lbs.) of force and a hardened conical tooling point to punch, break, and mangle hard drives and other media.
DIMENSIONS:
Body with handle removed: 21.25"H x 8"W x 17.75"D
Short handle fully extended & set at ~45º: 30"H x 8"W x 27.25"D
Long handle fully extended & set at ~45º: 40"H x 8"W x 36"D
WEIGHT:
106 lbs (48.08kg)
View AllClose